| MRC | Criteria | Characteristic |
|---|
| AAGR | CROSS-SECTIONAL SHAPE STYLE | ROUND |
| ABKU | FLANGE THICKNESS | 0.370 INCHES NOMINAL 2ND END |
| ABKV | OUTSIDE DIAMETER | 2.781 INCHES NOMINAL |
| AEPR | FLANGE OUTSIDE DIAMETER | 2.812 INCHES NOMINAL 1ST END |
| AEPR | FLANGE OUTSIDE DIAMETER | 2.812 INCHES NOMINAL 2ND END |
| AHNC | CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| AKUU | END CONNECTION DESIGN | ELBOW 2ND END |
| AKUU | END CONNECTION DESIGN | STRAIGHT 1ST END |
| AKXL | END FITTING COMPONENT AND MATERIAL | COMPLETE FITTING STEEL ALL ENDS |
| AKXM | FITTING COMPONENT AND SURFACE TREATMENT | COMPLETE FITTING CADMIUM 1ST END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 1ST END |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY |
| CQBD | BURST TEST PRESSURE | 10000.0 POUNDS PER SQUARE INCH |
| CQCS | LAYER COMPOSITION AND LOCATION | 1ST LAYER BRAIDED COTTON CORD |
| CQCS | LAYER COMPOSITION AND LOCATION | 2ND LAYER SPIRALLY LAID STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | 5TH LAYER SPIRALLY LAID STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | OUTER LAYER MOLDED RUBBER |
| CQGM | MAXIMUM OPERATING PRESSURE | 2500.0 POUNDS PER SQUARE INCH |
| CRDW | HYDROSTATIC TEST PRESSURE | 5000.0 POUNDS PER SQUARE INCH |
| CRFY | FLOW ANGLE | 90.0 DEGREES 2ND END |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| CRXX | MEASURING METHOD AND LENGTH | 31.000 INCHES NOMINAL WORKING |
| CTCJ | FLANGE STYLE | ROUND W/ OUT BOLT HOLES 1ST END |
| CTCJ | FLANGE STYLE | ROUND W/ OUT BOLT HOLES 2ND END |
| FEAT | SPECIAL FEATURES | INNER CONVEYING TUBE MATERIAL-RUBBER, CHLOROPRENE |
| ZZZT | NONDEFINITIVE SPEC/STD DATA | C TYPE |
| AARX | INSIDE DIAMETER | 1.750 INCHES NOMINAL |
| ABJH | TEMP RATING | -40.0 DEG FAHRENHEIT AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU | FLANGE THICKNESS | 0.370 INCHES NOMINAL 1ST END |
| ACKH | MINIMUM INSIDE BENDING RADIUS | 7.000 INCHES |
| AHNC | CONNECTION STYLE | PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 1ST END |
| AKUT | END FLANGE CONSTRUCTION | SOLID 2ND END |
| AWLS | CONNECTION TYPE | PLAIN FACE FLANGE 2ND END |
| CQCS | LAYER COMPOSITION AND LOCATION | 3RD LAYER SPIRALLY LAID STEEL WIRE |
| CQCS | LAYER COMPOSITION AND LOCATION | 4TH LAYER SPIRALLY LAID STEEL WIRE |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| ZZZK | SPECIFICATION/STANDARD DATA | 81349-MIL-H-52471 GOVERNMENT SPECIFICATION |
NSN 4720-00-790-1620