| MRC | Criteria | Characteristic |
|---|
| AAPN | SECTION QUANTITY | 3 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| AASA | THREAD LENGTH | 0.109 INCHES NOMINAL |
| AAVL | PILOT DIAMETER | 0.9995 INCHES MINIMUM AND 1.0005 INCHES MAXIMUM |
| AAVM | PILOT LENGTH | 0.0680 INCHES MINIMUM AND 0.0880 INCHES MAXIMUM |
| ABHP | OVERALL LENGTH | 2.605 INCHES NOMINAL |
| ABPA | UNDERCUT DIAMETER | 0.970 INCHES MINIMUM AND 0.980 INCHES MAXIMUM |
| ABPC | UNDERCUT WIDTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| ABPM | BODY DIAMETER | 1.000 INCHES NOMINAL |
| ABWV | SHAFT DIAMETER | 0.125 INCHES NOMINAL |
| ABXF | SHAFT LENGTH | 0.454 INCHES MINIMUM AND 0.565 INCHES MAXIMUM |
| ADAQ | BODY LENGTH | 2.000 INCHES MAXIMUM |
| ADAV | OVERALL DIAMETER | 1.320 INCHES NOMINAL |
| AEDX | SHAFT STYLE | ROUND, THREADED |
| AEFD | ACTUATOR TYPE | SINGLE SHAFT |
| AEFH | EFFECTIVE ELECTRICAL ROTATION IN DEG ANGULAR ROTATION | 352.0 NOMINAL |
| AEFK | MAXIMUM STARTING TORQUE | 1.00 INCH-OUNCES |
| AEFL | MAXIMUM RUNNING TORQUE | 0.60 INCH-OUNCES |
| AEFY | SHAFT END PLAY | 0.00500 INCHES |
| AEFZ | SHAFT RUNOUT | 0.001 INCHES |
| AEGA | LATERAL RUNOUT | 0.001 INCHES |
| AEGC | SHAFT RADIAL PLAY | 0.001 INCHES |
| AXGY | MOUNTING METHOD | CLAMP RING |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.000 PERCENT, RATED AMPERES C AND BETTER FINISH |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 2.000 PERCENT, RATED AMPERES C AND BETTER INDUSTRIAL CLEARS |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.75/+0.75 2ND SECTION |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -0.75/+0.75 3RD SECTION |
| CRGM | FUNCTION CONFORMITY PER SECTION | 1ST SECTION TERMINAL BASE LINEARITY |
| CRGM | FUNCTION CONFORMITY PER SECTION | 2ND SECTION INDEPENDENT LINEARITY |
| CRJS | FIXED TAP QUANTITY PER SECTION | 1 ALL SECTIONS |
| CRSS | RESISTANCE TOLERANCE PER SECTION IN PERCENT | -5.0/+5.0 ALL SECTIONS |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 5000.0 1ST SECTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 5000.0 3RD SECTION |
| CSCY | TEMP COEFFICIENT OF RESISTANCE WIRE PER SECTION IN PPM PER DEG CELSIUS | -85.0/+85.0 ALL SECTIONS |
| CSDH | AMBIENT TEMP IN DEG CELSIUS PER SECTION AT FULL RATED POWER | 80.0 ALL SECTIONS |
| FEAT | SPECIAL FEATURES | 0.437 IN. MIN. FULLSPLINE ON SHAFT |
| AAQL | BODY STYLE | CYLINDRICAL SERVO MOUNTED |
| AECZ | MOUNTING LIP DIAMETER | 1.0570 INCHES MINIMUM AND 1.0670 INCHES MAXIMUM |
| AEDA | MOUNTING LIP DEPTH | 0.0570 INCHES MINIMUM AND 0.0670 INCHES MAXIMUM |
| AEDZ | SHAFT BEARING TYPE | BALL |
| AEGB | PILOT DIAMETER RUNOUT | 0.00100 INCHES |
| APXH | TERMINAL LOCATION | RADIALLY POSITIONED OVER LESS THAN HALF THE CIRCUMFERENCE |
| CQCC | ELECTRICAL RESISTANCE PER SECTION | 10.000 PERCENT, RATED AMPERES C AND BETTER SELECT |
| CQCK | ROTARY ACTUATOR TRAVEL IN ANGULAR DEG | 360.0 NOMINAL |
| CQFL | FUNCTION CONFORMITY TOLERANCE PER SECTION | -1.00/+0.10 1ST SECTION |
| CRGD | POWER DISSIPATION RATING PER SECTION IN WATTS | 0.25 FREE AIR ALL SECTIONS |
| CRGM | FUNCTION CONFORMITY PER SECTION | 3RD SECTION INDEPENDENT LINEARITY |
| CRKS | TAP LOCATION TOLERANCE PER SECTION | -100.0/+100.0 OHMS ALL SECTIONS |
| CRSX | ACTUATOR TRAVEL CONTROL FEATURE | CONTINUOUS MOTION |
| CSBW | TAP LOCATION FROM CCW TERMINAL PER SECTION IN OHMS | 1000.0 2ND SECTION |
| CSBX | FUNCTION CHARACTERISTIC PER SECTION | ALL SECTIONS LINEAR |
| TTQY | TERMINAL TYPE AND QUANTITY | 12 SOLDER STUD |
NSN 5905-00-828-9327